Call Benco
Products

Parts Cleaners

HARRIS TOOL COMPANY MODEL NO. WA 30 X 43 FRONT LOAD MEDIUM DUTY WASHER WITH FOLLOWING MACHINE SPECIFICATIONS:

  • 15 MIN. SPRING WOUND TIMER OPERATED STAINLESS DISC TYPE OIL SKIMMER
  • 4.5KW ELECTRIC HEATER
  • TANK DEBRIS SCREEN (170 SQ. IN.)
  • 1 HP SELF PRIMING CENTRIFUGAL PUMP W/DOWN SUCTION SPOUT(50 GPM @ 16 PSIG)
  • 60 MIN.SPRING WOUND WASH TIMER
  • THERMOSTAT SWITCH W/ 175 DEGREES F SETTING
  • 17 SPRAY JETS
  • 50 GALLON CLEANING SOLUTION TANK
  • 500 LB. LOAD CAPACITY
  • 1/15 HP GEARMOTOR/WIRE WHEEL DRIVEN 30” DIA.TURNTABLE BASKET W/ PARTS RING & STANDARD BEARING DESIGN
  • 208-240/60/1 ELECTRICAL REQUIREMENTS
  • 14 GAUGE TANK & CABINET STEEL PLATE MATERIAL
  • HINGED DOOR W/ HANDLE, LATCH, SAFETY SWITCH & MECHANICAL SEAL(NO RUBBER GASKETS TO WEAR OUT)
  • 2 ½” DIA. CASTERS
  • 43” INSIDE & 66” OVERALL HEIGHT
  • 44”W X 43”D FLOOR SPACE REQUIRED W/ DOOR CLOSED
  • REMOVABLE PARTS TREE & BASKET
  • PRECAUTION BLUE PAINT
  • 500 LBS. SHIPPING WT.

HARRIS TOOL COMPANY MODEL NO. WA FRONT LOAD WASHER OPTIONS:

  • 6” DIA. CABINET VENT W/ INSIDE FLAP PLATE
  • 24 HR./7 DAY HEATER TIMER
  • 24 HR./7 DAY OIL SKIMMER TIMER
  • INTERMEDIATE SPRAY BAR W/ JETS
  • INTERMEDIATE SPRAY BAR W/ SPRAY JET NOZZLES
  • AUTOMATIC WATER FILL
  • REMOVEABLE SECONDARY TURNTABLE
  • TURNTABLE JOG SWITCH
  • SPRAY JET NOZZLES
  • 2 HP SELF PRIMING CENTRIFUGAL PUMP W/ DOWN SUCTION SPOUT(92 GPM @ 16 PSIG)
  • 12 HOUR HEATER TIMER
  • SS CABINET, DOOR, TURNTABLE, PLUMBING, PARTS TREE, & BSK

HARRIS TOOL COMPANY MODEL NO. WA-MHD 36 X 54 FRONT LOAD MEDIUM HEAVY DUTY WASHER WITH FOLLOWING MACHINE SPECIFICATIONS:

  • TOGGLE SWITCH OPERATED STAINLESS DISC TYPE OIL SKIMMER
  • 18 KW ELECTRIC HEATER
  • TANK DEBRIS SCREEN(210 SQ. IN.)
  • 7.5 HP CAST IRON VERTICAL SEALESS PUMP W/SCREEN(150 GPM @ 55 PSIG)
  • 60 MIN.SPRING WOUND WASH TIMER
  • 175 DEGREES F THERMOSTAT SWITCH SETTING
  • 28 SPRAY JET NOZZLES
  • 167 GALLON CLEANING SOLUTION TANK
  • LOW WATER SHUT-OFF SWITCH
  • 3,500 LB. LOAD CAPACITY
  • 54” INSIDE HEIGHT
  • 1/15 HP GEARMOTOR/GEAR DRIVEN 36” DIA.TURNTABLE W/ REMOVEABLE PARTS RING & JOG SWITCH
  • 240/480/60/3 ELECTRICAL REQUIREMENTS
  • INTERMEDIATE SPRAY BAR W/ NOZZLES
  • ½”PIN/KNUCKLE HINGED SEALESS DOOR W/ HANDLE, LATCH, AND SAFETY SWITCH
  • 12 GAUGE TANK & CABINET STEEL PLATE MATERIAL
  • 85” OVERALL HEIGHT
  • 52”W X 54”D FLOOR SPACE REQUIRED W/ DOOR CLOSED
  • PRECAUTION BLUE PAINT
  • 1750 LBS. SHIPPING WT.

HARRIS TOOL COMPANY MODEL NO.S WA-MHD FRONT LOAD WASHER OPTIONS:

  • 6” DIA. CABINET VENT W/ INSIDE FLAP PLATE
  • FILTER READY PLUMBING
  • FILTER SYSTEM
  • SINGLE PHASE (1 PH) ELECTRICAL REQUIREMENT
  • 480V/60HZ/3PH ELECTRICAL REQUIREMENTS
  • 24 HR./7 DAY HEATER TIMER
  • 24 HR./7 DAY SKIMMER TIMER
  • AUTOMATIC WATER FILL
  • TANK INSULATION
  • CRANE LOAD SLOT
  • NATURAL/LP GAS HEAT SOURCE
  • 3 HP RADIAL BLOWER/ 7.5KW HOT AIR DRYER
  • 6” CENTRIFUGAL IN-LINE STEAM EXHAUST DUCT FAN
  • REMOVABLE STANDPIPE/PARTS TREE
  • CASTERS
  • SS CABINET, DOOR, TURNTABLE, PLUMBING, & SPRAY JET NOZZLES


HARRIS TOOL COMPANY MODEL NO. SJW-2 27 X 35 FRONT LOAD HEAVY DUTY WASHER WITH FOLLOWING MACHINE SPECIFICATIONS:

  • TOGGLE SWITCH OPERATED STAINLESS DISC TYPE OIL SKIMMER
  • 13.5KW ELECTRIC HEATER
  • TANK DEBRIS SCREEN (132 SQ. IN.)
  • 3 HP CAST IRON VERTICAL SEALESS PUMP W/SCREEN(50 GPM @ 55 PSIG)
  • 60 MIN.SPRING WOUND WASH TIMER
  • THERMOSTAT SWITCH W/ 175 DEGREES F SETTING
  • 15 SPRAY JET NOZZLES
  • 94 GALLON CLEANING SOLUTION TANK
  • LOW WATER SHUT-OFF SWITCH
  • 500 LB. LOAD CAPACITY
  • 35” INSIDE HEIGHT
  • 1/20 HP GEARMOTOR/GEAR DRIVEN 27” DIA.TURNTABLE W/ REMOVEABLE PARTS RING
  • 240/480/60/3 OR 1 ELECTRICAL REQUIREMENTS(PLEASE SPECIFY)
  • ½” PIN/KNUCKLE/HINGED SEALESS DOOR W/ HANDLE, LATCH, & SAFETY SWITCH.
  • 2 ½” DIA. CASTERS
  • 10 GAUGE TANK/12 GAUGE DOOR & CABINET STEEL PLATE MATERIAL
  • 6” DIA. CABINET VENT
  • 48” OVERALL HEIGHT
  • 36”W X 70”D FLOOR SPACE REQUIRED W/ DOOR CLOSED
  • DURABLE BLUE POWDER COAT FINISH
  • 850 LBS. SHIPPING WT.

HARRIS TOOL COMPANY MODEL NO.S SJW-2, SJW-3, & SJW-4 FRONT LOAD WASHER OPTIONS:

  • SJW-2 INTERMEDIATE SPRAY BAR W/ NOZZLES
  • FILTER READY PLUMBING
  • FILTER SYSTEM
  • SJW-2 SINGLE PHASE (1PH) ELECTRICAL REQUIREMENT
  • 480V/60HZ/3PH ELECTRICAL REQUIREMENTS
  • 24 HR./7 DAY HEATER TIMER
  • 24 HR./7 DAY OIL SKIMMER TIMER
  • AUTOMATIC WATER FILL
  • SJW-2 TURNTABLE DOUBLE BSK.
  • SJW-3 TURNTABLE DOUBLE BSK.
  • SJW-4 TURNTABLE DOUBLE BSK.
  • SJW-2 TANK INSULATION
  • SJW-3 TANK INSULATION
  • SJW-4 TANK INSULATION
  • SJW-3 CASTERS
  • TURNTABLE JOG SWITCH
  • NATURAL/LP GAS HEAT SOURCE
  • SS CABINET, DOOR, TURNTABLE, PLUMBING, & SPRAY JET NOZZLES

HARRIS TOOL COMPANY MODEL NO. WA-JUMBO 50 X 72 FRONT LOAD SUPER DUTY WASHER WITH FOLLOWING MACHINE SPECIFICATIONS:

  • TOGGLE SWITCH OPERATED STAINLESS DISC TYPE OIL SKIMMER
  • 18KW ELECTRIC HEATER
  • TANK DEBRIS SCREEN (264 SQ. IN.)
  • 10 HP CAST IRON VERTICAL SEALESS PUMP W/SCREEN(240 GPM @ 55 PSIG)
  • 60 MIN.SPRING WOUND WASH TIMER
  • 175 DEGREES F THERMOSTAT SWITCH SETTING
  • 33 SPRAY JET NOZZLES
  • 300 GALLON CLEANING SOLUTION TANK
  • LOW WATER SHUT-OFF SWITCH
  • 3,500 LB. LOAD CAPACITY
  • 72” INSIDE HEIGHT
  • 1/15 HP GEARMOTOR/GEAR DRIVEN 50” DIA.TURNTABLE W/ REMOVEABLE PARTS RING & JOG SWITCH
  • 240/480/60/3 ELECTRICAL REQUIREMENTS(PLEASE SPECIFY VOLTAGE)
  • INTERMEDIATE SPRAY BAR W/ NOZZLES
  • ½” PIN/KNUCKLE HINGED DOOR W/ HANDLE, LATCH, AND SAFETY SWITCH
  • 10 GAUGE TANK/12 GAUGE DOOR & CABINET STEEL PLATE MATERIAL
  • 106” OVERALL HEIGHT
  • 66”W X 72”D FLOOR SPACE REQUIRED W/ DOOR CLOSED
  • PRECAUTION BLUE PAINT
  • 2600 LBS. SHIPPING WT.

HARRIS TOOL COMPANY MODEL NO.S WA-JUMBO
FRONT LOAD WASHER OPTIONS:

  • 6” DIA. CABINET VENT W/ INSIDE FLAP PLATE
  • FILTER READY PLUMBING
  • FILTER SYSTEM
  • 480V/60HZ/3PH ELECTRICAL REQUIREMENTS
  • 24 HR./7 DAY HEATER TIMER
  • 24 HR./7 DAY SKIMMER TIMER
  • AUTOMATIC WATER FILL
  • TANK INSULATION
  • 2” REMOVEABLE STANDPIPE/PARTS TREE(HD MODELS)
  • CRANE LOAD SLOT
  • NATURAL/LP GAS HEAT SOURCE
  • WA-JUMBO-HD 60 X 60 NATURAL/LP GAS HEAT SOURCE W/ 6” FLAME TUBE
  • SS CABINET, DOOR, TURNTABLE, PLUMBING, & SPRAY JET NOZZLES

HARRIS TOOL COMPANY MODEL NO. WA-JUMBO-HD
60 X 60 FRONT LOAD SUPER HEAVY DUTY WASHER WITH FOLLOWING MACHINE SPECIFICATIONS:

  • TOGGLE SWITCH OPERATED STAINLESS DISC TYPE OIL SKIMMER
  • 27 KW ELECTRIC HEATER
  • REMOVEABLE TANK DEBRIS SCREEN (400 SQ. IN.)
  • 15 HP CAST IRON VERTICAL SEALESS PUMP W/SCREEN(315 GPM @ 55 PSIG)
  • 60 MIN.SPRING WOUND WASH TIMER
  • 175 DEGREES F PROCESS THERMOSTAT CONTROLLER
  • CRANE LOAD SLOT
  • FORK LIFT CHANNELS FOR PORTABILITY
  • 42 REPLACEABLE/CLEANABLE SPRAY JET NOZZLES
  • 400 GALLON CLEANING SOLUTION TANK
  • LOW WATER SHUT-OFF SWITCH
  • 5,000 LB. LOAD CAPACITY
  • 60” INSIDE HEIGHT
  • 1/2 HP GEARMOTOR/GEAR DRIVEN 60” DIA. HD TURNTABLE/TRUCK HUB ASSY. & JOG SWITCH
  • 240/480/60/3 ELECTRICAL REQUIREMENTS(PLEASE SPECIFY VOLTAGE)
  • INTERMEDIATE SPRAY BAR W/ NOZZLES
  • ½” PIN/KNUCKLE HINGED SEALESS DOOR W/ HANDLE, LATCH, AND SAFETY SWITCH
  • 10 GAUGE TANK/12 GAUGE DOOR & CABINET STEEL PLATE MATERIAL W/ PRECAUTION BLUE PAINT
  • 90” OVERALL HEIGHT
  • 80”W X 80”D FLOOR SPACE REQUIRED W/ DOOR CLOSED
  • 3800 LBS. SHIPPING WT.

HARRIS TOOL COMPANY MODEL NO.S WA-JUMBO
FRONT LOAD WASHER OPTIONS:

  • 6” DIA. CABINET VENT W/ INSIDE FLAP PLATE
  • FILTER READY PLUMBING
  • FILTER SYSTEM
  • 480V/60HZ/3PH ELECTRICAL REQUIREMENTS
  • 24 HR./7 DAY HEATER TIMER
  • 24 HR./7 DAY SKIMMER TIMER
  • AUTOMATIC WATER FILL
  • TANK INSULATION
  • 2” REMOVEABLE STANDPIPE/PARTS TREE(HD MODELS)
  • CRANE LOAD SLOT
  • NATURAL/LP GAS HEAT SOURCE
  • WA-JUMBO-HD 60 X 60 NATURAL/LP GAS HEAT SOURCE W/ 6” FLAME TUBE
  • SS CABINET, DOOR, TURNTABLE, PLUMBING, & SPRAY JET NOZZLES

HARRIS TOOL COMPANY MODEL NO. PTW-1 PASS THROUGH WASHER WITH FOLLOWING MACHINE SPECIFICATIONS:

  • TOGGLE SWITCH OPERATED STAINLESS DISC TYPE OIL SKIMMER
  • 18KW ELECTRIC HEATER
  • TANK DEBRIS SCREEN BASKET(180 SQ. IN.)
  • 5 HP CAST IRON VERTICAL SEALESS PUMP W/SCREEN(70 GPM @ 55 PSIG)
  • THERMOCOUPLED PROCESS HEAT CONTROLLER W/ DIGITAL READOUT
  • 44 SPRAY JET NOZZLES
  • 190 GALLON CLEANING SOLUTION SLOPED TANK
  • LOW WATER SHUT-OFF SWITCH
  • 500 LB. LOAD CAPACITY
  • 15” INSIDE LOAD HEIGHT X 16” CONVEYOR WIDTH OPENING W/ NEOPRENE CURTAINS & BAFFLE SEAL
  • 1/4 HP SPROCKET/CHAIN DRIVEN CONVEYOR
  • 0-15 FT./MIN. CONVEYOR ADJUSTABLE SPEED RATE
  • 240/480/60/3 ELECTRICAL CONTROL PANEL(PLEASE SPECIFY VOLTAGE)
  • EASY REMOVEABLE ACCESS PANELS FOR NOZZLE SERVICE
  • 10 GAUGE TANK/12 GAUGE DOOR & CABINET STEEL PLATE MATERIAL
  • 6” DIA. CABINET VENT AND STEAM HOOD
  • 72” OVERALL HEIGHT
  • 60”W X 87”L FLOOR SPACE REQUIRED
  • FRAMEWORK DESIGNED FOR PORTABILITY
  • PRECAUTION BLUE PAINT
  • 2000 LBS. SHIPPING WT.

HARRIS TOOL COMPANY MODEL NO.S PTW-1 & PTW-3
PASS THROUGH WASHER OPTIONS:

  • FILTER READY PLUMBING
  • FILTER SYSTEM
  • 480V/60HZ/3PH ELECTRICAL REQUIREMENTS
  • 24 HR./7 DAY HEATER TIMER
  • 24 HR./7 DAY SKIMMER TIMER
  • AUTOMATIC WATER FILL
  • TANK INSULATION
  • METERING SOAP INJECTION SYSTEM
  • ELECTRIC EYE CONVEYOR STOP
  • NATURAL/LP GAS HEAT SOURCE
  • AIR BLOWER SYSTEM
  • SS CABINET, TANK, HOOD, PLUMBING, CONVEYOR, & SPRAY JET NOZZLES
  • CUSTOM INSIDE LOAD HEIGHT AND CONVEYOR WIDTH SPECIFICATIONS
  • 2 & 3 STAGE CUSTOM PTW SYSTEM

THE HPSC-1 PROVIDES PRESSURES UP TO 1000 PSI PROVIDES A FAST ECONOMICAL CLEANING SOLUTION FOR HEAVY DUTY, LARGE PARTS CLEANING. WITH A 500 LBS. WORK LOAD CONVEYOR, DUEL RUBBER CURTAINS ON EACH END AND ROLLER CONVEYOR MAKES FOR EASY ACCESS AND INCREASED PRODUCTION. THE INDUSTRIAL STRENGTH DIAPHRAGM PUMP GIVES THIS UNIT LONG LIFE IN INDUSTRIAL SETTINGS.

  • Double rubber curtains for easy access.
  • Easy to operate controls
  • Foot operated pump on/off control
  • Heavy duty 12 gage steel construction
  • 1.5 H.P. Diaphragm pump
  • Stainless steel oil skimmer
  • Low water shut-off switch
  • Durable Powder coat finish
  • Available In Stainless Steel

MACHINE SPECIFICATIONS

HPSC-1

Machine Area Footprint

62"Lx48"Wx70"H

Work Area Opening

24"Hx36"Wx24"D

Pump Motor

1.5Hp Diaphragm

Pump Output

Up to 1000 PSI @ 3 GPM

Filtration

100 micron inlet screen/sock

Power Source

240 Volt 1ph or 3ph

Heat Source

4.5KW w/thermostat

Conveyor

60"Lx22"W

Cabinet Construction

10 gage steel

Work Load

500 Lbs.

Solution Capacity

60 Gallons

Shipping Weight

750 Lbs

Warranty

One year parts


HPSC-1 WASHERS CAN BE CONSTRUCTED OF STAINLESS OR CARBON STEEL. CHOOSE FROM OUR STANDARD MODELS OR LET US CUSTOM BUILD A UNIT TO MEET YOUR NEEDS.

The best-kept secret in the Midwest

If you have used high-quality parts washers, you have probably used PMW machines. We have been designing and building heavy-duty washers for nearly 20 years, with many distributed under private label names.

Now the secret is out. PMW quality, service and solid guarantee are yours to order direct. For precision and quality you can count on in your operation, why not go straight to the quality source? Precision Metal Works, an MKC company.


Quality = people, parts + process

  • Our Quality Assurance program starts with the people we hire.  Our workforce is among the most dedicated and the hardest-working in the nation.
  • We overbuild to help make certain you have no surprises down the road.  We choose the heavier, higher-quality component parts and materials. We use only the best and forget the rest.
  • PMW parts washers are 100% in-house manufactured. We build them from the ground-up right here in our advanced facility.  We purchase only quality pumps and motors and we design and manufacture all major assemblies ourselves for maximum quality and accountability.
  • Our integrated manufacturing process allows us to cost-efficiently add custom options and features to precisely match the application you are planning.

This rugged machine is designed for small parts to V-8 blocks. With a 12 ga. steel cabinet, a 2 hp. main pump, lift out turntable, low water shut off and it's portable.

The model 110 is the perfect Power Spray Washer for the small shop as well as an inexpensive additional washer for the large shops overflow work. The model 110 will eliminate the use of a solvent tank. The 110 rugged, heavy duty welded construction assures years of trouble free service and includes key features resulting in performance benefits. The model 110 provides a safe and efficient method to wash parts in both commercial and industrial applications.

Model 110 features:

  • Safety - Hot water and biodegradable detergents are far safer to work with and environmentally safer to dispose.

  • Compact - Portable Design - Approximately the size of a solvent tank and rolls on optional casters.

  • Fully self contained

  • Full Automatic - Timed cycle allows user to perform other tasks while parts are washed automatically.

  • Cleaner Parts - Dirt, oil and grease, naturally separate from water and the wash solution remains cleaner and does not redeposit on the parts. Optional Stainless Steel Belt Oil Skimmer - The oil skimmer removes floating petroleum products.

  • Turntable Rotation - The turntable turns the parts to ensure a complete exposure to wash solution therefore a cleaner part.

  • Working Height - 18" under the spray bar. (28" opt'l.)

  • Optional Hand Brush - A separate pump fed hand brush can be provided for larger parts and special detailing.

  • Capacity - 300 lbs.

  • Size - 52"H x 40"W x 34"D

  • Standard 550 lbs.

With a standard 5 hp. Pump, 26" dia. turntable, and a 40" working height this washer has many more standard and optional features available. Turntable easily handles loads up to 800 lbs.

The model 412 is ideal for commercial rebuilders and larger shops.  5 H.P. pump, 1/15 H.P. turntable gear motor, 12 Kw. electric heat, Insulated cabinet, Electric lockout, 70 gal. reservoir and 5 cu. ft. parts basket standard. The many options available allow the user to custom design the 412 to meet all applications. Contact P.M.W. for information on other available models.

Model 412 & 412ST (Soak Tank) features:

  • Labyrinth door design - eliminates the need for troublesome replacement seals.
  • 40" work height - will accept any automotive block, cylinder head or transmission body in todays market.
  • Door mounted turntable - Swings out to provide easy access for loading and unloading. 800 lb. capacity turntable.
  • Other Sizes & Options Available.
  • Size - 78"H x 60"W x 61"D
  • Standard 1500 lbs.
  • w/Soak Tank, 1700 lbs.



Working Dimensions: 36" dia. turntable and 54" working height.  1000 lbs. load capacity.  3500 lbs. shipping weight.
Size - 102"H x 76"W x 66"D
The 812 series machines are available in 6 standard sizes. Up to a 6 ft. dia. turntable with 60" working height and 2000 lbs. Many other sizes are available also.

The model 812 is ideal for commercial rebuilders, industrial applications and large shops. The many options available allow the user to custom design the 812 to meet all applications. The door mounted turntable design is built to provide complete accessibility. Labyrinth door design eliminates the need for expensive replacement seals.

Standard Features:

  • Door mounted mechanical drive turntable.
  • 1/2 Hp turntable motor.
  • Front reservoir.
  • Fully insulated.
  • Fresh water rinse with manual diverter baffle.
  • 7-day timer.
  • Labyrinth seal door.
  • 18 KW electric heater.
  • Stainless steel wash nozzles.
  • 15 HP Standard pump

PMW – if you’ve never heard of us, it’s because nobody’s complaining.

http://www.pmwequipment.com/index.htm