The Best Selling Brake Lathe of All Time
Since its introduction nearly 40 years ago, the AMMCO Model 4000 has been a favorite of brake technicians everywhere.
And for good reason. It's simple. It's fast. And it almost never breaks down.
The Model 4000 features twin cutter tools and quick drum-to-rotor changeover. Adjustable spindle speeds allow for easy rough cut/finish cut settings, and there's an infinitely adjustable spindle-feed gear box.
The Model 4000 supports drums or rotors up to 100 lbs. using the standard one inch (25.4mm) arbor, or up to 200 lbs. using the optional 1.875 inch (47.63mm) arbor (Part #3481).
It's the best seller because year after year it performs the best.
| Rotor Diameter | *14.5" |
| Max. Rotor Face Width | 3.75" |
| Max. Rotor Thickness | **1.75" |
| Drum Capacity (Diameter) | 6"-28" |
|
Flywheel Diameter Flat or Stepped |
*17.5" |
| Flywheel Face Width | *3.75" |
| Drum,
Rotor, Flywheel Max. Weight A. Standard B. Heavy Duty Arbor (Part# 3481) C. With Optional Outboard Support (Part# 5925) |
A. 100 Lbs. B. 200 Lbs. C. 600 Lbs. |
| Spindle Speed | 100, 200 RPM |
| Rotor Feed Rate | .002"/.010"/REV |
| Drum Depth | Up to 6.875" |
| Drum Feed Rate | 002" to .020"/REV |
| Motor | 1 HP |
| Shipping Weight | 365 Lbs. |
| Warranty | 1 Year |
| Spindle Bearings | Bronze Sleeve |
| Standard Tool Bits | Negative Rake |
| Arbor Taper | Double |
|
Key Features
|
|
Patented floating spindle design for more precise cuts. Quick drum-to-rotor changeover. Twin cutter tools. Can handle drums or rotors up to 200 lbs. with optional arbor (Part #3481). |