High-Productivity Disc-Only Lathe
The Model 7500 dramatically expands service capabilities for luxury, foreign, and late model cars.
The Model 7500 is a disc-only model (over 90% of the brake jobs today) designed for productivity and accuracy. It quickly reconditions worn rotors to meet or exceed factory specs for surface finish, runout and thickness variation. Depth-of-cut dials can be calibrated in both thousands of an inch and tenths of a millimeter.
The Model 7500 complements a drum lathe or combination lathe by providing your shop with high-speed capacity for the majority of the jobs you do.
| Rotor Diameter | *14.5" |
| Max. Rotor Face Width | 3.75" |
| Max. Rotor Thickness | **1.75 |
| Drum Capacity (Diameter) | N/A |
| Flywheel Diameter Flat or Stepped |
*17.5" |
| Flywheel Face Width | 3.75" |
| Drum, Rotor,
Flywheel Max. Weight A. Standard B. Heavy Duty Arbor (Part# 3481) C. With Optional Outboard Support (Part# 5925) |
A. 100 Lbs. B. 200 Lbs. C. N/A |
| Spindle Speed | 100, 200 RPM |
| Rotor Feed Rate | .002"/.010"/REV |
| Drum Feed Rate | N/A |
| Motor | 1 HP |
| Shipping Weight | 367 Lbs. |
| Warranty | 1 Year |
| Spindle Bearings | Bronze Sleeve Front, Dual Roller Rear |
| Standard Tool Bits | Negative Rake |
| Arbor Taper | Double |
|
Key Features
|
|
• One cut capability. • Quick-change Poly-V belt and pulleys for optimal RPM selection (100 or 200). • Two speed feed control. • Constant lubrication during operation. |