The modern, efficient and profitable U-400 is a rugged, heavy duty unit that applies reverse tension to restore dimensions and sheet metal smoothly, accurately. Its smooth power often makes replacement of damaged sections unnecessary. The U-400 is different because of the straight pull or push - horizontally or vertically - with full power. Adapts to more jobs because of its versatility. The unit can be taken apart and reassembled to do different and tough jobs. The roller mounted Power Carriage glides easily under pressure. It provides a straight pull or push. If a chain breaks or a clamp slips, the wide wheel base keeps the unit on the floor and upright - an important safety feature. It rolls up close to the work and stays on the floor as power is applied. After the full stroke of the ram, the Power Bar can be locked into position, under tension, and the Jack Anchor moved forward for more push or pull as needed. This multiple-action feature is a big time saver.

The U-400B consists of the basic unit and accessories designed specifically for the U-400. These accessories are what make the erector set principle possible. Each piece is interchangeable. With these accessories you can build the unit to push, pull, pull up, pull down, push up or push down and make multiple hookups. Anchoring the unit is fast. You can extend the unit, make high pulls and adapt it to many other possible combinations. Truly a body man's erector set for collision repair. Wt: 551 lbs.

Hook-up-direct. No chain slack to take up. Eliminates 70% of the raising and swinging.	Reverse the ram to the other side of the Power Carriage and push at any angle.
Build it to push down. The principle of body work is to reverse the damage.	Save time by reaching over the radiator and pushing down, or for work inside the trunk.
There is less chance for the metal to tear if you use several clamps with a multiple hook-up.	Build it to push up..
Pull frame and sheet metal at the same time.