Equipto Slotted Angle and Parts
Equipto Slotted Angle is the front-runner in creating steel framing systems. Visualize it, cut it, then bolt it. Build structures to do exactly what you want them to do, with almost no limit to the number of ways it can be assembled.


6460
Corner Gusset
When used as corner brace, this 2" x 7 7/8" gusset adds strength and rigidity to slotted angle units.

  

 		   Equipto Angle Cutter
One stroke makes a clean cut every time. Strong enough to make thousands of cuts through both Heavy and Super Duty angle. Top Blade part number 2711, Lower Blade part number 2710.		  
Description of Bundle Shipping Weight (lbs.) Catalog No.
10 heavy-duty angles 1 1/2" x 2 1/4" x 14 gauge (.080’’), 10' long 96 5610-10
10 heavy-duty angles 1 1/2" x 2 1/4" x 14 gauge (.080’’), 12' long 114 5612-10
10 super duty angles 1 1/2" x 3" x 12 gauge (.104’’), 10' long 145 5710-10
10 super duty angles 1 1/2" x 3" x 12 gauge (.104’’), 12' long 175 5712-10
   
Beam Length
     
 
Description 2' 3' 4' 5' 6' 7' 8' 9' 10'
Single Pieces 1139 759 569 455 379 325 284 253 227
Short Legs Down 731 488 365 293 244 209 183    
Single Pieces 3547 1576 886 568 396 289 222 175  
Long Legs Up 1314 583 328 210 146        
Single Pieces 3547 2365 1771 1327 1014 777 587 427 312
Long Legs Down 1314 875 657 524 438 375 328 237 173
Narrow 6385 4256 3192 2553 2129 1824 1598 1418 1277
Channels 2365 1576 1182 946 788 676 591 525 473
T-Beams 7094 4729 3547 2837 2365 2026 1775 1576 1418
  2626 1751 1314 1051 875 750 657 583 525
Broad 10417 6945 5208 4167 3388 2617 2002 1489 1087
Channels 4105 2737 2052 1642 1368 1173 885 637 464
Broad Channels 10417 6945 5208 4167 3472 2976 2604 2315 2092
with Stiffners 4105 2737 2052 1642 1368 1173 1026 912 212
J-Beams 15145 10097 7572 6058 5048 4326 3785 3366 2831
  6922 4614 3460 2769 2307 1977 1730 1538 1350
I-Beams 20835 13890 10416 8334 6945 5952 5208 4629 4166
  8211 5474 4106 3284 2737 2346 2053 1825 1642
Note: Capacities in the Table above are for angle used as horizontal beams, in lbs. of distributed load. For load concentrated in center of beam, cut figures in half. BOLD FIGURES show capacities per pair of Type 5700 beams; LIGHT FIGURES are for Type 5600 beams. All figures are in lbs. of steady load, with a safety factor of 1.67. For shock or lateral thrust, add braces as needed. Where shown, connecting stiffners should not be spaced over 3 ft. apart. I-beams and other multiple angles should be bolted together every 12".