Tommy Gate Dump Lifts

Lift N Dump application liftgates fit platform, stake or dump body trucks. LD models come in capacities of 1,000, 1,300 and 1,600 lbs.

Tommy Gate's line of dump-through liftgates fit most dump bodies. The liftgate can be used as a conventional gate (photo 1) or can be set for dump-through use (photo 2).

See Also:

  • The Flatbed, Stake & Van Series for conventional liftgates without dump-through capability.

Download  Specifications
 
photo 1

photo 2
 
All measurements in inches, unless noted.WxD - Width x Depth
Model
Capacity (lbs)
Travel
Gate Width
Clear Opening
Platform Loadable Area (WxD)
Platform Taper
2 Piece Folding Platform
Application Code
Gate Weight* (lbs)
72-1046 LD TP
1000
46
72
69
69x34
None
No
AEF
550
80-1046 LD TP
1000
46
80
78
78x34
None
No
BEF
590
86-1046 LD TP
1000
46
86
83
83x34
None
No
CEF
620
91-1046 LD TP
1000
46
91
88
88x34
None
No
DEF
630
72-1350 LD TP
1300
50
72
69
69x34
None
No
AEF
550
80-1350 LD TP
1300
50
80
78
78x34
None
No
BEF
590
86-1350 LD TP
1300
50
86
83
83x34
None
No
CEF
620
91-1350 LD TP
1300
50
91
88
88x34
None
No
DEF
640
72-1650 LD TP
1600
50
72
69
69x34
None
No
AEF
560
80-1650 LD TP
1600
50
80
78
78x34
None
No
BEF
600
86-1650 LD TP
1600
50
86
83
83x34
None
No
CEF
625
91-1650 LD TP
1600
50
91
88
88x34
None
No
DEF
640

Tommy Gate recommends a double acting hoist. If the truck has a single acting hoist, it will require tie-down clamps.

TP - Standard Treadplate Steel platform * - Add 15 lbs for shipping weight for TP models.

Application Code
Body Style Body size (width)
A. 64" to 69" opening 64" to 69"
B. 69" to 78" opening 69" to 78"
C. 78" to 84" opening 78" to 84"
D. 84" to 89" opening 84" to 89"
E. Box dump with double acting hoist
F.Platform dump with double acting hoist
Lift N Dump Features:
  • A - Torsion Assist Bar
  • B - Lift arms designed to reduce friction
  • C - Hydraulic & electrical systems enclosed in Main Frame Box
    • D. Pressure Relief Valve
    • E. Cylinder-mounted flow control valve
    • F. Power cable molded with ground cable
  • G - Compatible with many receiver style trailer hitches
  • H - Driver's-side mounted fixed control
  • I - Latex coated drop chains
  • J - Steel platform

Standard Features

Torsion Assist Bar
A Torsion Assist Bar aids in closing the liftgate platform.
Main Frame Box

The Main Frame Box cover is now removable with platform in the up or down position. The electrical and hydraulic systems are located inside for easy access while being protected from the elements.

Located inside are the pump and motor unit, cables, cylinders, and:

-Pressure Relief Valve - Prevents the raising of the lift if the platform is overloaded.

Molded Ground/Power Cable

All Liftgates come standard with a full-length molded ground and power cable and a circuit breaker.

Molded Power Cable

The dual-cable design allows a direct connection from the liftgate to the battery without needing a separate ground connection or ground strap.

 The 150 amp circuit breaker with manual reset helps protect the electrical system.

Circuit Breaker

-Cylinder Mounted Flow Control valve - The flow control valve guards against uncontrolled descent in event of hose failure.

-Pump and Motor - The full-size pump and motor unit has a two year warranty.
Trailer Hitch compatible
A Tommy Gate Lift N Dump Series liftgate can be installed with many receiver-style trailer hitches.
Fixed Control
LND model liftgates come standard with a driver's side mounted control. For safety and ease of use, the control features:
  • A - "Power On" LED light (blinking light indicates low-voltage)
  • B - "Liftgate Enabled" LED light
  • C - Main "Power On" switch, press to arm, press twice to reset low voltage
  • D - Toggle-style switch is easier to operate with work gloves than push button controls.
  • E - A reset button located under the logo is used to turn power onto the liftgate. A Timer deactivates the liftgate 90 seconds after the last operation. This helps control unauthorized use.
  • Low-Voltage protection helps prevent electrical failure.

Note: Lift N Dump fixed control is mounted on the driver's side - curb-side mounting (instead of driver's-side) available by request.

 Link to Optional Remote Pendant Control

 
Latex-coated drop chains
Latex-coated chains reduce noise.
Standard Steel platform (options)
The liftgate platform is available as standard steel or in optional materials. Click here for a complete list of platform options.