Hobart Handler® 125 / Handler® 125 MIG
Handler 125  

Handler® 125 / Handler® 125 MIG

Rugged and portable, the Handler® 125 operates off 115-volt household current. Comes ready to weld without shielding gas using .030-.035 in (0.8-0.9 mm) flux cored wire. For greater versatility, consider the Handler® 125 MIG (or upgrade the Handler 125 with the optional MIG conversion kit.) This unit has a solenoid valve installed for welding with .023-.030 in (0.6-0.8 mm) solid wire and gas shielding. Use C-25 gas (75% argon/25% CO2) on 22 gauge - 1/8 in steel for a cleaner weld with less spatter. Use Tri-Mix gas and stainless wire for welding on 16-12 gauge stainless steel.
Comes complete with:
  • Comfortable 8 ft (2.4 m) H-9 gun with liner for .023-.035 in (0.6-0.9 mm) wire
  • Three .030 in (0.9 mm) contact tips
  • 10 ft (3 m) work cable with clamp
  • 1 lb spool of .030 in (0.9 mm) self-shielding flux cored wire
  • Spool shaft to accommodate 4 in spools (Optional hub kit available for 8 in spools)
  • Power cord with plug
  • Weld set-up and parts information chart
  • The Handler 125 MIG also includes a gas solenoid valve, Argon-mix regulator and 5 ft (1.5 m) gas hose
Power
  • CV
  • DC
  • 1 Phase
Processes
  • Flux Cored (FCAW)
  • MIG (GMAW)
Material Thickness
  • Welds 20 gauge up to 3/16 inch
Skill Level
  • Low
Applications
  • Farm/Ranch
  • Light Maintenance and Repair
  • Light Fabrication